![Buick 225/231/350 Power Steering Pump Mount](http://brennans-garage.com/cdn/shop/products/225TCM1_{width}x.jpg?v=1632847576)
In stock for 2024 again!
Confirmed: This mount will bolt to (some) Buick 231 and Buick 350 engines also.
This CNC machined 6061-T6 aluminum mount bolts to the drivers head providing a mount for a Type-II 'TC' style power steering pump.
-This bracket is slotted to allow for belt adjustment directly at the pump and also allow 30 degrees of pump rotation to help with packaging.
-All threaded features for pump mounting use replaceable captured nut pockets on the back of the bracket to allow for easy replacement. No risk of stripping out threads in the bracket.
-The pump is positioned to use the 1st groove on the factory crank pulley when using pulley #48251 from Allstar Performance. The recommend Allstar pulley is a heavy offset 6" diameter unit to allow the pump to be as far away from the exhaust manifold as possible. The bracket can shaved down to be used with other pulley offsets and diameters.
-The flat head mounting bolt for the inside fastener on the head provides extra space for HEI style distributor timing adjustments.
-While any TC pump with 5/16 through holes will work with this bracket ( including remote reservoir units), I suggest using the Eddie Motorsports MS100-73M unit or similar (pictured above). This unit is completely new and comes with a compact attached reservoir including a dipstick cap and the return output faces the correct direction. This pump is also built to provide 1500psi and 3gpm. Other possible pump options include the following applications-
Jeep MJ 4.0L 88-89
GM LLV 87-93
GM 87-89 2.5L Astro or Safari
Cardone 2033776
BBB 73316113
UltraPower 2033776
Lares 12700
BBB 73311137
-Belt- A Duralast 15385 is a very good fit ( putting the pump reservoir almost perfectly vertical ). This belt is a 38.6 Circumference with a .41" width. This part number crosses to a Dayco 15385 or other similar part numbers.
-These style pumps (listed above) typically have a M16 x 1.5 O-ring pressure output port and a 3/8" return hose male barb fitting. A Russel 648060 adapter will provide a -6 AN/JIC connection that makes a custom power steering hose very easy.
-Note- The feed line from your fuel pump to the carburetor may need rerouting to clear the power steering pump assembly.
-Hardware to mount the bracket to the head, and the pump to the bracket, is included in the purchase price
-USPS shipping included